7. Use of Each Component
7
Ignition switch
keyhole
OPERATION OF IGNITION SWITCH
IGNITION SWITCH
IGNITION SWITCH KEY
MAGNETITE KEY
：
Insert your magnetite key into the magnetite keyhole, and turn it to right ignition keyhole block
board can be to open.
When close ignition keyhole. You just push the Ignition keyhole block board push rod, and ignition
keyhole can be to close.
IGNITION SWITCH
：
“ON” position (engine start)
：
Engine can be started in this
position.
Ignition switch key can not be
removed.
“OFF” position (engine shut off)
：
Engine is shut off and can not be
started in this position.
Ignition switch key can be removed.
“OPEN" position (fuel tank cap open)
：
How to open
：
Insert your key into the
ignition switch, and
turn it to the left.
How to lock
：
Push the fuel tank cap and
it locks automatically.
“LOCK" position (steering handle lock)
：
Turn the steering handle to left and
press ignition switch key down and
then lightly turn it to left to the “
.”
position.
The steering handle is locked in this
position.
Ignition switch key can be removed.
When unlocking, simply turn the key
from “
” to “
”
CAUTION
：
Never operate the ignition switch key when the scooter is running. To turn the ignition switch to “
”
will shut off the electrical system and that may result in a dangerous accident. Therefore, the
ignition switch can only be turned off after the scooter has been completely stopped.
Always remove the key and be sure to take the key away with you after locking the steering handle
before leaving your scooter.
If ignition switch remains in the “ON” position for a prolonged period after the engine has been
stopped, the battery’s capacity will be reduced and this may affect the engine’s start ability. Make sure
to take the key away with you before you lock your seat.
Magnetite key
keyhole
Magnetite key
