1. General Information/Trouble Diagnosis
1-5
•
Lubricate the rotation face with specified
lubricant on the lubrication points before
assembling.
•
Check if positions and operation for installed
parts is in correct and properly.
•
Make sure service safety each other when
conducting by two persons.
•
Note that do not let parts fall down.
•
Before battery removal operation, it has to
remove the battery negative (-) cable firstly.
Notre tools like open-end wrench do not
contact with body to prevent from circuit short
and create spark.
•
After service completed, make sure all
connection points is secured.
Battery positive (+) cable should be connected
firstly.
And the two posts of battery have to be
greased after connected the cables.
•
Make sure that the battery post caps are
located in properly after the battery posts had
been serviced.
•
If fuse burned, it has to find out the cause and
solved it. And then replace with specified
capacity fuse.
capacity
verification
