35
EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function
Setup
VCR Functions
Others
Español
4
Use [
K
/
L
/
{
/
B
] or [the Number
buttons] to enter the start and end
time, then press [
B
].
Date
JAN/02
L1/L2
L1
REC To
Speed
DVD
2H
2H
2 : 00
Start
End
- - : - -
12 : 00AM
5
Use [
K
/
L
] to select the appropriate
external input position (L1/L2) to
which your external tuner is
connected, then press [
B
].
Date
JAN/02
L1/L2
REC To
Speed
DVD
2H
2H
1 : 00
Start
End
12 : 00AM
1 : 00AM
L1
6
Use [
K
/
L
] to select a recording media
(“DVD” or “VCR”), then press [
B
].
Date
JAN/02
L1/L2
REC To
Speed
2H
2H
1 : 00
Start
End
12 : 00AM
1 : 00AM
L1
DVD
7
Use [
K
/
L
] to select a recording
speed.
Date
JAN/02
L1/L2
REC To
Speed
2H
1 : 00
Start
End
12 : 00AM
1 : 00AM
L1
DVD
2H
Refer to “Recording Speed” on page 31 for DVD
or “Recording” on page 82 for VCR.
• You can check the remaining recordable space
of the disc when you select the recording
speed.
Date
JAN/02
L1/L2
REC To
Speed
2H
1 : 00
Start
End
12 : 00AM
1 : 00AM
L1
DVD
2H
8
Press [ENTER] when all items are
entered.
Your program setting will be stored.
• To set another program, repeat steps 2 to 8.
• To exit, press
[TIMER PROG.]
or
[SETUP]
.
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 36.
9
Press [T-SET] to set a timer
programming.
will appear on the front panel display, while this
unit waits to make the recording.
BS CS
DR
CD
HDD
DVD
"VCR” will appear if VCR timer recording have
been set.
TIMER RECORDING
Note
• If you have not set the clock yet:
“Clock Setting” menu will appear instead of the timer
programming list at step 1. Continue with the step 3
in “Clock Setting” on page 23 before setting a timer
programming.
• Use
[
s
/
B
]
to move the cursor to the left and the
right in “Timer Programming” menu.
• If a basic recording or one-touch timer recording is in
progress on one component (e.g., VCR) and the timer
recording set for the other component (e.g., DVD) is
about to begin, the unit automatically switches to the
programmed channel for timer recording 2 minutes
before the programmed starting time, and the
recording in progress (for VCR) will be canceled
UNLESS their recording channels are the same. If their
recording channels are the same, the timer recording
will start without canceling the recording currently in
progress. In this case, the recording of the same
channel will be made on both DVD and VCR.
• Cancel the timer-standby mode by pressing
[T-SET]
before operation for either DVD or VCR.
When finished operating, press
[T-SET]
to resume
the timer-standby mode.
• In the timer-standby mode, you can turn on the
power and use the component (VCR or DVD) which is
not currently timer-programmed.
