3983099
Pole Mount Bolt Drill Pattern
Mounting with Wall Mount (NAED 61875):
1. Run the fixture wires through the bracket (Figure 10).
2. Install the bracket on the fixture and secure with the screws provided (Figure11).
3. Drill holes on the wall using the dimensions provided. (Figure 12)
4. Secure fixture to wall with (2) bolts (not included with fixture). (Figure 13)
5. Make all wiring connections via the supplied wire leads in accordance with NEC and local codes and pull the wires
completely into wall junction box.
6. The wall mounting bracket allows the luminaire to be adjusted up to 90° above horizontal (Figure 7). Loosen the adjustment
bolt and adjust tilt as needed and tighten adjustment bolt to lock in place.
Figure 10
Figure 11
Figure 12
Distances:
3.03” OC between 2 – Ø 0.39” holes
1.52” OC between Ø 0.39” hole & Ø 0.79” hole
Figure13
Mounting with Trunnion Mount (NAED 61878):
1. Run the fixture wires through the bracket (Figure 14).
2. Install the bracket on the fixture and secure with the screws provided (Figure15).
3. Drill holes on the wall using the dimensions provided. (Figure 16)
4. Secure fixture to wall with (2) bolts (not included with fixture). (Figure 17)
5. Make all wiring connections via the supplied wire leads in accordance with NEC and local codes, and pull the wires
completely into wall junction box.
6. The trunnion mounting bracket allows the luminaire to be adjusted up to 90° above horizontal (Figure 17). Remove the
locking screw and loosen the adjustment bolt. Adjust tilt as needed and tighten adjustment bolt to lock in place with the
locking screw.
Figure 14
Figure 15
Summary of Contents for ValueLED 61875
Page 8: ...3983099...
