17
The PIR Motion Detector is designed to detect the movement of objects in a room or
hallway. The effective range of the motion sensor is 30 feet long, with an 84degree
horizontal angle. Before using this sensor, please program this sensor into the main
console via the sequence programming menu. Even if the PIR Motion Detector is
triggered and the main console is armed in the HOME mode, the main console will
neglect the PIR signal. You can move freely within your house without triggering the
alarm.
Main Features :
1. LED :
When the PIR has detected any human movement, the red LED will blink for
One sec. This means its transmitting out a signal to the Main Console. When
the battery power becomes low, it will send out a low battery message and the
red LED will blink for one sec ond. If the Main Console receives this message,
it will leave a message on the display.
2. C/OFF/W SWITCH :
(i)
When the switch is set to “C – Continue” position, the PIR sensor will continually
detect movement at a 3 to 5 second interval
(ii) When the switch is set to the “ OFF” position, the power is turned OFF and the
PIR sensor will not work.
(iii) When the switch is set to the “W- Wait” position, the PIR sensor will detect
movement at a 2 to 3 minute interval. This is to conserve battery power.
3. DETECTING SENSITIVITY
:
(1, 2, 4) select the sensor for high, medium or low
sensitivity.
4. BATTERY
:
Remove the Battery cover and insert one 9V alkaline battery.
5. ARM & HOLDER
:
For mounting on the wall.
6. BATTERY COVER
PIR Motion Detector
Summary of Contents for SY4100
Page 28: ...27...