1. Remove the stylus cover from the stylus and release
the Tone arm form the T
one
arm rest.
2
. Place a record on the turntable platter and select the
specified
speed (33
1/3,
45
or
78)
according to the record.
NOTE:
If you are playing 45RPM singles, place the 45 RPM adapter on the
center
spindle (45RPM adaptor is located in the holder near the tone arm).
3
. Push up the lift lever to raise the tone arm and gently move the tone arm to the
desired
position onto the record
.
Push down the lift lever
to let
the tone arm slowly
onto the record
to
start playing the record.
4
. Adjust the volume control to your desired level.
5
.
The record will stop automatically when the played is finished, and you must return the
tone arm to the arm rest manually.
IMPORTANT:
Do not turn or stop the Turntable platter manually. Moving or jarring the
Turntable platter without securing the Tone Arm Clamp could result in damage to the Tone
Arm or Stylus.
STEP-BY-STEP
O
PERATIONS
L
isten to the
PHONO
2.
The device
will start to playback automatically
(If not, press the
/REC.
button
until the unit it starts to play).
The MODE lamp will start
to and keep
blinking
until
the playing is stopped
.
3. Adjust the volume to
your
desired level.
Removing the USB device/SD card
Please be sure to press PLAY/PAUSE button and turn the unit OFF before removing the
USB device/SD card to avoid damage the USB/SD card and system.
Note:
*
Th
ere are many USB devices/SD card in the market. We cannot guarantee to support
all different models. Please try another
if it is
not supported.
* The unit might not support all multimedia files stored in USB/SD card
. Some special
tracks may be not compatible and cannot be played.
CHARGE
POWER
MODE
LIGHT
USB
SD CARD
REC STOP
REC.
USB
L
isten to the device
USB/SD
card
1. Connect a USB device/ SD card containing MP3 files or MP3 player to the USB port/
SD card slot.