AUX IN
mode
Bluetooth operation
1.
Press the POWER/SOURE to switch between USB/SD and BT. The green
MODE lamp
will
blink
very slowly
when switching to the
Bluetooth
mode.
2
.
Activate the
Bluetooth
function on your external
Bluetooth
device (
cell
phone or
other
music
device).
3
.
select the pairing name "
SYLVANIA STT104BT
" from the devices list on your external
device and tap it.
If the passcode is required on some device, enter the password ‘0000’.
4
.
Once paired successfully, the MODE
lamp
will stop blinking and turn to solid blue
,
and two beeps will be heard.
Now you can enjoy the music from your cell phone
or other devices with
Bluetooth
function.
...
PHONE
AUX IN
ON
OFF
VOL
1. Insert one end of the AUX cable to the AUX OUT or earphone port on the external
device, the other end into the AUX IN port on the unit. (cable not supplied)
2. The unit will switch to AUX IN mode automatically and start to play music from the
external device
(
If not, press
/
REC.
button repeat
ed
ly until hearing music from the
unit
)
.
3.
4.
Adjust the volume to the desired level.
To disconnect the connection, just turn off your external device and unplug the
AUX
cable
from
the unit
,
and
one beep will be heard indicating the connection is off
.
5
.
To disconnect the connection, tap "i" after the pairing name "SYLVANIA STT104BT" and
then
"Disconnect"
, or
just turn off the
Bluetooth
function on the connected device,
or press the
/
REC.
button on the unit
to switch the input way
.
Recording from
PHONO
or
AUX IN
1. Insert a USB/SD card into the USB port/SD card slot.(Make sure the USB device/SD
card have enough space)
2.Start playback in PHONO mode or AUX IN mode.
3.
Press and hold the
/
REC.
button for 3 seconds. Release the button when
a beep is
heard and the MODE lamp starts to blink
slowly
. Now the recording process
starts.,
and
the MODE lam
p
will keep blinking
rapidly
when the recording is in process.
4.
Press the
/
REC.
button
again
to stop recoding.
T
he MODE
lamp will go off, indicating
the recording process is stopped.
5. To listen
to
the recorded track, Press the
/REC.
button
.
(Sometimes it will start to
play once the recording process is stopped, due to the type of USB/SD card.)
6
.
Once
the
Bluetooth
disconnected
, the MODE
lamp
will
go back to the blinking condit
i
on
,
and one beep will be heard.