Sylvania SRZ3000 Owner'S Manual Download Page 51

51

EN

1A23

Advanced Operation

5 Ad

v

anced

Operation

includes:

ADD / DELETE:

You can add or delete channels in the channel map.

ANTENNA:

You can verify and adjust the signal strength of each channel to get a clearer picture.

AUTOSCAN:

You can get available channels automatically into the channel map by completing AUTOSCAN.

includes:

SCREEN RATIO:

You can fit the screen ratio to your TV screen.

DISPLAY MODE:

You can choose the display mode as you prefer.

includes:

Daylight Saving Time (DST):

You can set the Daylight Savings Time (DST).

TIME ZONE:

You can set the time zone.

MANUAL:

You can set the clock manually.

AUTO:

You can adjust the clock automatically using the channel clock data included in the signal from digital
broadcast sources.

includes:

V-CHIP/ CC:

You can make some settings for V-CHIP and closed caption including your won password.

MENU LANGUAGE:

You can choose the language you prefer for the screen menu.

Setup menu for preference

ST200.qxd  03.3.19 7:05 PM  Page 51

Summary of Contents for SRZ3000













































































































Reviews: