Sylvania SRZ3000 Owner'S Manual Download Page 31

Page: 31 / 108

3 Select a desired language using

navigation buttons, then press ENTER.

•

The selected language will be activated.

•

SETUP WIZARD 2/8 will appear.

4 STB starts scanning channels.

•

Wait until the scanning is complete.

•

When the scanning is complete, “100%” will be
indicated in the box, then the next screen appears.

To skip the scanning:

Press ENTER.

5 SETUP WIZARD 3/8 will appear.

6 Select ON or OFF for Daylight Savings

Time (DST) using

navigation

buttons, then press ENTER.

•

SETUP WIZARD 4/8 will appear.

SETUP WIZARD 4/8

Select your time zone.

CENTRAL

SETUP WIZARD 3/8

Do you observe daylight saving time
(DST)?

OFF

SETUP WIZARD 2/8

Now the system is scanning for channels.

SKIP

Digital

34%

Analog

SETUP WIZARD 2/8

Now the system is scanning for channels.

SKIP

Digital

Analog

1A23

Initial Setups (Setup Wizard)

3 Initial Setups

(Setup Wizar

ST200.qxd 03.3.19 7:05 PM Page 31

Summary of Contents for SRZ3000













































































































Search results

Summary of Contents for SRZ3000

Reviews:

Sylvania SRZ3000, Owner'S Manual, Page: 31 / 108

Search results

Summary of Contents for SRZ3000

Reviews: