17
, ,
,
need to set or reset. Press the
OK
Button to enter or confirmed the selection. After setting, press the SETUP Button to save the settings and exit.
Direction Buttons to select and highlight the function you
In General Setup Page:
the multi-angle logo will appear on the screen.
or the image is paused for approximately
three
minutes.
On or Off. If set to On, when
multi-angles are available in the playing DVD,
Direction and
Buttons to set the
OSD language as desired.
Off. If set to On, the
screen saver will come on when the unit stops
it On or
5. If Last Memory is selected, using the Direction and OK Buttons to set it On or Off. If set to On, the unit
will start playback from the position where the disc was stopped last time.
1. If TV Shape is selected, using the Direction and OK Button to set the aspect ratio to match the connected TV.
2.
If Angle Mark is selected, using the Direction and OK buttons to set it
OSD Lang (On Screen Display Language) is selected, using the
3.
If
4.
If Screen Saver is selected, using the Direction and
Buttons to set
menu will appear.
to Lt/Rt; Stereo.
If Speaker Setup is selected, press the
Button, the sub-setting
1.
If Downmix is selected, using the Direction and OK Buttons set it
~ If set to Lt/Rt, the rear left or rear right channels will plays on both Left and Right Speakers.
~ If set to Stereo, the rear left channel will plays on Left Speaker; the rear right channel will plays on Right
Speaker.
In Dolby Setup Page:
channel on all speakers) or Mix-Mono
plays on all speakers) as desire. (Functions depend on the recording of the disc).
to Stereo, L-Mono (Play Left
channel on all speakers), R-Mono (Play Right
(Mixed Right and
Left channel then
1.
If Dual Mono is selected, using the Direction and
Buttons to set it
2. If Dynamic is selected, using the Direction and OK Buttons to set the dynamic level as desired or turn
it off.
SYSTEM SETUP
OK
OK
OK
OK
In stop playback mode, press the SETUP Button on remote control, the setting menu will appear on screen as below.
Using the
In Speak er Setup Page:
