background image

2

CAUTION

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

SEE BOTTOM OF UNIT FOR GRAPHIC SYMBOLS

The exclamation point within a triangle alerts 

you to the presence of important operating, 

maintenance  and servicing instructions in this 

user’s manual.

The lightning flash with an arrowhead within 

a triangle alerts you to uninsulated dangerous 

voltage within the product’s enclosure that could 

cause an electric shock.

CAUTION:

 TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING 

TO QUALIFIED PERSONNEL.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT 

TO RAIN OR MOISTURE. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON 

OR NEAR THIS UNIT.

CAUTION:

 DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. 

REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.

IMPORTANT SAFETY INSTRUCTIONS

•  Read these instructions.

• 

Keep these instructions.

• 

Heed all warnings.

• 

Follow all instructions.

• 

Do not use this apparatus near water.

• 

Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid 

cleaners or aerosol cleaners. Use a dry cloth for cleaning.

• 

Do not block any ventilation openings. Install in accordance with the manufacturer’s 

instructions.

• 

Do not install near any heat sources such as radiators, heat registers, stoves, or other 

apparatus (including amplifiers) that produce heat.

• 

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized 

plug has two blades with one wider than the other. A grounding type plug has two 

blades and a third grounding prong. The wide blade or the third prong is provided for 

your safety. If the provided plug does not fit into your outlet, consult an electrician for 

replacement of the obsolete outlet.

• 

Protect the power cord from being walked on or pinched particularly at plugs, 

convenience receptacles, and the point where they exit from the apparatus.

• 

Unplug this apparatus during lightning storms or when unused for long periods of time.

• 

Refer all servicing to qualified service personnel. Servicing is required when the 

apparatus has been damaged in any way, such as power-supply cord or plug is 

damaged, liquid has been spilled or objects have fallen into the apparatus, the 

apparatus has been exposed to rain or moisture, does not operate normally, or has 

been dropped.

• 

This unit shall not be exposed to dripping or splashing water and that no object filled 

with liquids such as vases shall be placed on the apparatus.

• 

Do not overload wall outlet. Use only power source as indicated.

• 

Use replacement part as specified by the manufacturer.

• 

Power Sources - This product should be operated only from the type of power source 

indicated on the marking label. If you are not sure of the type of power supply to your 

home, consult your product dealer or local power company. For products intended to 

operate from battery power, or other sources, refer to the operating instruction

Summary of Contents for SCR1996-PL












Reviews: