background image

2

WARNING: 

 

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 

APPARATUS TO RAIN OR MOISTURE.

 

 APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS 

FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

CAUTION

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 

NOT REMOVE COVER (OR BACK). NO USER 

SERVICEABLE PARTS INSIDE. REFER SERVICING TO 

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within 

an equilateral triangle, is intended to alert the 

user to the presence of uninsulated “dangerous 

voltage” within the apparatus’s enclosure that may 

be of sufficient magnitude to constitute a risk of 

electric shock to persons.
The exclamation point within an equilateral triangle is 

intended to alert the user to the presence of important 

operating and maintenance (servicing) instructions in 

the literature accompanying the apparatus.

The caution marking is located on the rear or bottom of the cabinet.

Important Safety Instructions

1.

  Read these instructions.

2.

  Keep these instructions.

3.

  Heed all warnings.

4.

  Follow all instructions.

5.

  Do not use this apparatus near water.

6.

  Clean only with dry cloth.

7.

   Do not block any ventilation openings. Install in 

accordance with the manufacturer’s instructions.

8.

   Do not install near any heat sources such as radiators, 

heat registers, stoves, or other apparatus (including 

ampli

fi

 ers) that produce heat.

9.

   Do not defeat the safety purpose of the polarized 

or grounding-type plug. A polarized plug has two 

blades with one wider than the other. A grounding 

type plug has two blades and a third grounding 

prong. The wide blade or the third prong are 

provided for your safety. If the provided plug does 

not 

fi

 t into your outlet, consult an electrician for 

replacement of the obsolete outlet.

10.

    Protect the power cord from being walked on 

or pinched particularly at plugs, convenience 

receptacles, and the point where they exit from 

the apparatus.

11.

    Only use attachments / accessories speci

fi

 ed by 

the manufacturer.

12.

    Use only with the cart, stand, 

tripod, bracket, or table speci

fi

 ed 

by the manufacturer, or sold with 

the apparatus. When a cart is used, 

use caution when moving the cart / apparatus 

combination to avoid injury from tip-over.

13.

    Unplug this apparatus during lightning storms or 

when unused for long periods of time.

14.

    Refer all servicing to quali

fi

 ed service personnel. 

Servicing is required when the apparatus has been 

damaged in any way, such as power-supply cord or 

plug is damaged, liquid has been spilled or objects 

have fallen into the apparatus, the apparatus has 

been exposed to rain or moisture, does not 

operate normally, or has been dropped.

Wall Mount Bracket Kit

Recommended Wall Mount Bracket Kit:

Brand:

Sanus Vuepoint

  

Model #:

 

F10

   

 Recommended Screw dimension when purchased:

M4 x 0.472”  (12mm)

   

•  The recommended Wall Mount Bracket Kit (sold separately) 

allows the mounting of the TV on the wall.

•  For detailed information on installing the wall mount, refer to 

the Wall Mount Instruction Book.

•  Funai is not responsible for any damage to the product or injury 

to yourself or others if you elect to install the TV Wall Mount 

Bracket or mount the TV onto the Bracket on your own.

•  Wall Mount Bracket Kit is sold separately and is not supplied.

•  The Wall Mount Bracket must be installed by experts.

Funai not liable for these types of accidents or 

injury noted below.

•  Install the Wall Mount Bracket on a sturdy vertical wall.

•  If installed onto a ceiling or slanted wall, the TV and Wall 

Mount Bracket may fall which could result in a severe injury.

•  Do not use screws that are longer or shorter than their 

speci

fi

 ed length. If screws too long are used this may cause 

mechanical or electrical damage inside the TV set. If screws 

too short are used this may cause the TV set to fall.

•  Do not fasten the screws by excessive force; this may damage 

the product or cause the product to fall, leading to an injury.

•  For safety reasons use 2 people to mount the TV onto a Wall 

Mounting Bracket.

•  Do not mount the TV onto the Wall Mounting Bracket 

while your TV is plugged in or turned on. It may result in an 

electrical shock injury.

When installing the unit on the wall, allow this much space.

Top:

11.8 inches (30cm)

Left and right side:

5.9 inches (15cm)

Bottom: 

3.9 inches (10cm)

Summary of Contents for LC220SS2


































Reviews: