Radio Operations:
1. Press the Standby Button on the unit or Remote Control to power on the unit.
2. Slide the
RADIO/iPod/AUX
selector to RADIO position.
3. Slide the
Band Switch
to AM or FM as desired. (Note: If stereo FM radio station is
receiving, the unit will play it in stereo mode automatically without any indicators.)
4.
Turn the
Tuning Knob
to receive the desired radio station. The radio frequency
of the selected station will appear on the display.
Setting the Clock
1. Press and hold the
CLOCK Set Button
.
2. While holding the
CLOCK Set Button
, press the
Hour Button
to adjust the hour and
the
Minute Button
to adjust the minute.
3. When finished, release the
CLOCK Set
Button.
Connecting to an External Audio Player using the AUX IN Jack
1. Insert one side of the 3.5mm audio connection cable (not included) to the AUX IN
Jack on the rear of unit.
2. Insert the other side of the connection cable to the Phones jack /Line out jack/Aux
Out jack of the external audio device. (Such like the non-dockable iPod Player, MP3
Player, CD Discman ..etc)
3. Slide the AUX/iPod/RADIO Selector to AUX IN position.
4. Power on both units.
5. Play the music in the connected external audio device as usual.
6. Turn the VOLUME Knob to adjust volume.
9
5.
Turn the
Volume
Knob
to adjust volume as desire.
6. When finished listening, press the Standby button to power off the unit.
ANTENNAS
AM - This unit has a build in ferrite rod antenna, which provides adequate reception in
most areas. If reception is weak, turn the unit to improve reception.
FM - The FM Wire Antenna is for FM reception only. If reception is weak, adjust the
location of the antenna.
