1-6-1
E6500DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
2. Disassembly Method
(1): Identification (location) No. of parts in the figures
(2): Name of the part
(3): Figure Number for reference
(4): Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P=Spring, L=Locking Tab, S=Screw,
CN=Connector, W=Washer
*=Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5): Refer to “Reference Notes.”
Reference Notes
CAUTION 1: Be sure to remove the Top Cover with lift-
ing up by the right and left portion in the front as
shown in Fig. D1.
CAUTION 2: Locking Tabs (L-1) and (L-2) are fragile.
Be careful not to break them.
2-1. Release four Locking Tabs (L-1). Then, release
three Locking Tabs (L-2).
2-2. Disconnect Connector (CN4203), and remove
the Front Assembly.
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
Note
[1]
Top Cover D1
6(S-1)
1
[2]
Front
Assembly
D2
*4(L-1), *3(L-2),
*CN4203
2
2-1
2-2
[3]
SW CBA
D2
3(S-2)
-
[4]
DVD
Mecha &
FE
Assembly
D3
2(S-3), 4(S-4), *CN1,
*CN2202, Fan Sheet
-
[5]
DVD BE
Main CBA
Unit
D4
4(S-5), *CN6, *CN7,
BE Earth Spring
-
[6]
Holder D
D4
3(S-6)
-
[7]
DC Fan
Motor
D4
2(S-7), *CN2203,
Fan Holder
-
[8]
AV CBA
D5
5(S-7), 7(S-8), (W-1)
-
[9]
FL CBA
D5
(S-9), desolder
-
[10]
Jack CBA D5
(S-10), desolder
-
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
[1] Top Cover
[2] Front Assembly
[4] DVD Mecha & FE Assembly
[5] DVD BE Main CBA Unit
[6] Holder D
[7] DC Fan Motor
[3] SW CBA
[8] AV CBA
[9] FL CBA
[10] Jack CBA
[1] Top Cover
(S-1)
(S-1)
(S-1)
Fig. D1
