You will find STB and the following accessories
when unpacking the carton box of STB:
1 Unsnap the battery cover from the back
of the remote control.
2 Install two AA batteries making sure
the polarity (+ / -) direction is correct.
NOTE:
When replacing batteries, make sure to replace them
in pairs.
3 Snap the battery cover back.
CAUTION:
•
Do not mix battery types.
(alkaline and manganese)
•
Do not recharge, short-circuit, heat, burn or
disassemble batteries.
Installing batteries
STB
6900DTD
Remote controller unit and AA batteries (x2)
(PART No.: NE120UD)
Owners manual (PART No.: 0EMN02308)
Accessories
11
EN
1A23
Before Using
1 Bef
ore Using
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-
tions concerning chemical wastes.
ST201UB.qxd 04.3.9 4:04 PM Page 11
