Sylvania 6719DD Page 33 Owner'S Manual Download

Page: 33 / 56

- 33 -

1C29

To shift the time schedule of an automatic timer
recording.
1)Press the POWER button.
2)Repeat step [1] on page 32.
3)Press the RECORD button and select the desired

program using the Arrow button

4)Press the RECORD button again.

Each additional push will shift forward the
begin/end time for recording by 10 minutes. When
the recording is already in progress, each additional
push will shift forward the end time only. If you
want to cancel while setting, press the PAUSE but-
ton on the remote control. The recording time
returns to the original time.

NOTE:

When you shift forward the time schedule

during recording, the recording speed will automati-
cally be set to the SLP mode.
5)Press the ENTER or RETURN button to exit the

setting menu. Then press the SETUP button on the
remote control to return to original mode.

TO CORRECT A PROGRAM

•

While setting a program;

press the Arrow button

to go back one step and enter the correct num-

bers using the Arrow button

•

After setting a program;

1)Press the POWER button.
2)Repeat steps [1] - [2] on page 32.
3)Press the Arrow button

(or press the Arrow

button

to go back one step) until the part you

want to correct begins flashing, then make the
changes pressing the Arrow button

4)Press the POWER button to set automatic timer

recording.

TO CANCEL AN AUTOMATIC TIMER
RECORDING

•

After setting a program;

1)Press the POWER button.
2)Repeat steps [1] ~ [2] on page 32 and select a

program you want to cancel.

3)Press the C.RESET button.
4)Press the SETUP button on the remote control to

return to TV mode.

•

While recording is in progress;

1)Press the POWER button.
2)Press the STOP/EJECT button on the

TV/DVD/VCR.

TV/VCR

Set beginning hour

Press the Arrow button

until

the desired hour appears.
(Example: “ 7, PM” for

:30

)

Then, press the Arrow button

Set beginning minute

Press the Arrow button

until

the desired minute appears.
(Example: “30” for 7:

PM)

Then, press the Arrow button

Set end hour

Press the Arrow button

until

the desired hour appears.
(Example: “8, PM” for

:50

)

Then, press the Arrow button

Set end minute

Press the Arrow button

until the desired minute appears.
(Example: “50” for 8:

PM)

Then, press the Arrow button

Set the tape speed

Press the Arrow button

until the desired tape speed
appears. (Example: SP)

Finish setting the program

Press the ENTER or RETURN button. The program
is now completed.

•

To set another program, repeat steps [2] to [10].

•

Press the SETUP button on the remote control to
return to original mode.

Set the timer

Press the POWER button to set automatic timer
recording. The RECORDING indicator lights up.

•

You must turn off the TV/DVD/VCR to activate
automatic timer recording.
If power is not turned off and you continue watch-
ing TV, “TIMER REC STANDBY” starts flashing
on the TV screen 2 minutes before the programmed
start time.

TIMER PROGRAM EXTENSION

– TIMER PROGRAMMING –

CH DATE

BEGIN END

- -

-/- - - - -

-:- -

-:- - - -

- -

-/- - - - -

-:- -

-:- - - -