Sylvania 6319CCB, Service Manual, Page: 78 / 108

1 : Follow steps in sequence. When reassembling, follow the steps in reverse order.
These numbers are also used as Identification (location) No. of parts in the figures.
2 : Indicates the part to start disassembling with in order to disassemble the part in column (1).
3 : Name of the part
4 : Location of the part: T=Top B=Bottom R=Right L=Left
5 : Figure Number
6 : Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered.
P=Spring, W=Washer, C=Cut Washer, S=Screw, *=Unhook, Unlock, Release, Unplug, or Desolder
e.g., 2(L-2) = two Locking Tabs (L-2).
7 : Adjustment Information for Installation
(+): Refer to Deck Exploded Views for lubrication.
STEP
/LOC.
No. START-
ING
No.
PART
REMOVAL INSTALLATION
Fig. No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
ADJUSTMENT
CONDITION
[33] [26] Loading Arm S Assembly B DM2, DM14
(+) Refer to Alignment
Sec. Pg. 2-4-9
[34] [33] Loading Arm T Assembly B DM2, DM14
(+) Refer to Alignment
Sec. Pg. 2-4-9
[35] [26] M Brake T Assembly T DM1, DM15 *(P-6)
[36] [36] M Brake S Assembly T DM1, DM15 *(P-7)
[37] [36]
Tension Lever Sub
Assembly
T DM1, DM15
*(P-8), (C-8)
[38] [37] T Lever Holder T DM1, DM15 *(L-4)
[39] [1] M Gear T DM1, DM15 (C-9)
[40] [35] Reel T T DM1, DM15
[41] [37] Reel S T DM1, DM15
[42] [41]
Moving Guide S
Preparation
T DM1, DM16
(S-15), Slide Holder S
[43] [34]
Moving Guide T
Preparation
T DM1, DM16
(S-16), Slide Holder T
[44] [19] TG Post Assembly T DM1, DM16 *(L-5)
[45] [27] Rack Assembly R DM17
(+) Refer to Alignment
Sec. Pg. 2-4-10
[46] [45] F Door Opener A R DM17 *(P-9)
[47] [47] Cleaner Lever Assembly T DM1,DM5
[48] [47] CL Post T DM1,DM5 *(L-6)
↓
➀
↓
➁
↓
➂
↓
➃
↓
➄
↓
➅
↓
➆
2-4-2 Z10DA2H