Warning: when first using the iron, you may notice that some water mixed with
steam is released from the hotplate. It is advisable therefore not to direct the first
jet of steam at the fabric to be ironed. Act on the steam adjusting knob (C) to get
the required amount of steam. Press the button on the iron handle to control the
output of steam. The red light on the functions button will turn on when there is
no water.
13
Blower tube + Small nozzle (F1):
Thanks to the blower function it is possible to reverse air flux to blow, simply by replacing
the air outlet grille at the back with the proper blower tube, equipped with connecting
device (Fig.13). Insertion of the clear nozzle (F1) at the blower tube end will further incre-
ase blower function efficacy (Fig.14).
This function transforms our appliance into a mini compressor - perfect for cleaning
stereo systems, computers or narrow areas, etc.. It is also useful to blow away leaves
and plant debris built up in the garden.
WARNING! Absolutely avoid blocking the blower tube air outlet, with your hands or by
pressing it against various surfaces (e.g. if you are working between sofas), in order to
prevent motor overheating.
7. Blower function (optional)
uscita aria
Figure 13
Figure 14
WARNING! Absolutely avoid blocking the blower tube air outlet, with your hands or by
pressing it against various surfaces (e.g. if you are working between sofas), in order to
prevent motor overheating.
Fill the water tank as described in chapter 3. Carry on with your cleaning operations,
choosing the best accessory for the job (see chapter 5).
To have maximum vacuum power, keep the handle shutter closed. The small nozzle will
turn out to be really precious for all those hidden spots in the kitchen, in the bathroom,
etc. To dust lamps, shades or other delicate objects, use the round brush K, reducing
vacuum speed with the main control, or else with the handle shutter, very useful to
change vacuum power directly while you are working.
If you are vacuuming dust or other kind of dirt, replace the tank water frequently.
If you only want to vacuum dust, refill the water tank in any case as described in chapter
3.
WARNING! To vacuum liquids, you do not have to fill the purification tank with
clean water! If great amounts of water are to be aspirated, you should certainly
use medium or low vacuum power, never maximum. The appliance can aspirate
up to 1.4 litres liquid. Switch on the vacuum cleaner and press the functions button.
If you want to aspirate liquids spilled on the floor, you will have to use the extension
tube (C), with the nozzle inserted in, and connect it to the handle by simply pressing. To
get maximum aspirating power, keep the handle shutter constantly closed. To aspirate
liquids from the floor, medium vacuum speed is highly recommended, especially in case
of large amounts of water (e.g. overflow from wash basins). Maximum speed is advisa-
ble only for small amounts of water.
8. Liquids and dust suction
14
