9
www.sylvan.co.nz
SL41E INSTALLATION INSTRUCTIONS
Step 3:
Install Inside Lock Panel
3. Fit the fixing screws that are the correct length to align the
lock to the door.
4. Before final tighten ensure the lock is sitting vertical and
that no excess cables have been caught against the door.
5. Ensure the rubber boots are sitting flat against the door.
6. Finally, hand tighten the lock hard against the door face.
1. Carefully remove battery cover from inside panel and
connect cable ensuring there is adequate space within
the door for it to prevent any crush issues.
2.
IMPORTANT
Plug in power cable ensuring the plug is around the
correct way for the plug to accept its receiver correctly.
7. Install the correct type of batteries into the lock
(4 x Alkaline AA batteries)
8. Re attach battery cover plate
9. Finally fit striker plate and striker box to the door frame
ensuring that the latch and bolts work freely when the door
is closed.
10. To test the correct operation of the deadbolt of the lock test
by lifting the inside handle up and ensuring it runs freely into
the striker plate without any resistance. If binding occurs the
striker plate might need a re adjustment in position.
11. Installation of the lock is now complete
IMPORTANT
Do not pull on the plug or cable with force or let the hardware
hang from the cable, damaged caused will void the warranty
