59
9. Menu “USER SETTINGS”
• Brie
fl
y push the “MENU” button (4) as described in chapter
8. b). The bottom-most display line shows “USER SETTINGS“.
• Use the “–” (3) and “+” (2) buttons to switch between “USER
SETTINGS” and “INSTALL SETTINGS”.
Select “USER SETTINGS” and then push the button “OK” (5).
• Then the buttons “–” (3) and “+” (2) can be used to select the
desired function (see following subchapters or short descrip-
tion in chapter 8. b).
• Con
fi
rm the selection with “OK” (5).
•
If you want to leave a function or the setting menu, push
the button „MENU“ (4).
a) Function G1 “PROGRAM SELECT”
The room thermostat has 3 independent memories for switching
times/temperatures.
If you want to use different programmes depending on season
(e,.g. for alternating control of a heating or cooling device, see
information in chapter 7), you can store the respective matching
times/temperatures in slots 1, 2 and 3.
1.
After selecting this function G1 “PROGRAM SELECT” and
con
fi
rming with “OK” (5), the memory slot number (1, 2 or 3)
fl
ashes in the display.
2. Select one of the 3 memory slots with the buttons “–” (3) and
“+” (2).
3. Con
fi
rm the selection with “OK” (5).
The room thermostat is then in the previous menu for selec-
tion of functions again.
4. To leave the menu and return to the regular display, push the
button “MENU” (4), repeatedly if required.
Summary of Contents for TOUCH TX5
Page 175: ...175 ...
