The home technology brand for the entire house. More information at
www.sygonix.com
GB
Operating instructions
Recessed LED light “Fano”, 1.2 W
Intended Use
The recessed light is intended for illuminating indoor areas; it may only be installed
and used in dry, enclosed indoor rooms. The product is intended for installation in a
wall.
The safety instructions must be observed at all times!
Any other use than that described above may damage the product. Moreover, this
may give rise to hazards such as short-circuiting,
fi
re, electric shock, etc. No part of the
product may be modi
fi
ed or converted!
This product complies with the applicable National and European requirements. All
names of companies and products are the trademarks of the respective owner. All
rights reserved
Package Contents
• Recessed LED light
• Operating Instructions
Explanation of Symbols, Inscriptions
This symbol indicates speci
fi
c risks associated with handling, function and
use.
The “arrow” symbol indicates special tips and operating information.
The recessed LED light is only intended to be located and used in dry
indoor rooms, it must not get damp or wet.
The recessed LED light complies with Protection Class III.
Observe the operating instructions!
Safety Instructions
Please read through all of the instructions carefully before using the de-
vice; they contain important information on its correct operation.
The warranty will be void in the event of damage caused by failure to ob-
serve these safety instructions! We do not assume any liability for any
consequential damage!
Nor do we assume liability for damage to property or personal injury
caused by improper use or failure to observe the safety instructions. The
warranty will be void in such cases!
If you do not have the expertise required for the installation and the
connection, do not install and connect it yourself but ask a quali
fi
ed
technician.
• The unauthorised conversion and/or modi
fi
cation of the product is not
allowed for safety and approval reasons (CE).
• The recessed light is not a toy and should be kept out of the reach of chil-
dren! Install the recessed light so that it can not be reached by children.
• The product is designed according to protection class III.
• The recessed light is only to be installed and used in dry, enclosed indoor
spaces. The recessed light must not get damp or wet.
• The product must not be exposed to extreme temperatures, strong vibra-
tions or heavy mechanical stress.
• Do not use the recessed light in rooms or under adverse ambient conditions
where combustible gases, vapours or dust are or may be present! There is a
risk of explosion!
• Attention, LED light:
Do not look directly into the LED light!
Do not look into the beam directly or with optical instruments!
• If you have reason to assume that safe operation is no longer possible, dis-
connect the device immediately and secure it against inadvertent operation.
It can be assumed that safe operation is no longer possible if:
- the product shows visible signs of damage,
- the product does not work at all or works poorly (
fl
ickering light, leaking
smoke or a smell of burning, the light
fl
ickers, audible cracking noises, dis-
colouration to the product or the adjacent surfaces.)
- the product was stored for a longer period of time in unfavourable condi-
tions
- it was exposed to heavy loads during transport
•
Do not leave packaging material carelessly lying around since it could
become a dangerous plaything for children.
• In commercial institutions, the accident prevention regulations of the em-
ployer’s liability insurance association for electrical systems and operating
facilities are to be observed!
• If you have any questions that are not answered in this manual, please con-
tact our technical service or another specialist.
Installation and Connection
Pay attention to the information in the chapter “Safety notes”!
• If you want to install more than one recessed light (e.g. to illuminate a foyer, a stair-
case etc.), plan the installation locations very carefully.
• The recessed light has to be installed in a suitable opening in a cavity wall, using the
retaining clamps on its sides. For the measurements required, please consult the
section: “Technical Data” at the end of these operating instructions.
• Depending on where you locate the power supply (power supply unit), lay a cable
between the recessed light and the power supply unit. For this purpose, we recom-
mend you use an appropriate colour-coded cable: red = plus/+, black = minus/-
You will need a power supply unit that provides an output voltage of 24 V/DC and a
current of at least 50 mA.
• Remove the cover on the back of the junction box, by unscrewing the retaining screw
on the cover. Also loosen the screw for the cord grip.
• Connect the two terminals for the recessed light with the connection cable of the
power supply unit you are using.
Make absolutely sure that you observe the correct polarity when you do this:
the red cable in the junction box is the positive terminal (+); the black cable is
the negative terminal (-).
Incorrectly wiring the recessed LED light will destroy it and lead to loss of
warranty!
• Fasten the connection cable in the cord grip.
• Replace the junction box cover and secure it with the screw that you removed earlier.
• Press together the two retaining clips at the back and push the recessed LED light
into the mounting hole.
The retaining clips spring out and hold the recessed LED light in place.
• Switch on the power to the power supply unit you are using and check whether the
recessed LED light is working.
If the recessed LED light does not light up, turn off the power immediately.
Check whether the polarity of the recessed LED light's cable is correct:
(red cable = plus/+; black cable = minus/-).
