The home technology brand for the entire house. More information at
www.sygonix.com
GB
Operating instructions
6 socket power strip
with USB power supply
Intended Use
With the power strip, the loads connected to it can be turned on or off via the inbuilt
mains switch.
The power strip must be connected to an earthed mains socket; the mains voltage
must be 230 V/AC, 50 Hz.
The total power consumption of all connected loads may not exceed 3680 W.
An inbuilt surge protection protects loads, connected to the power strip, against surges
in the mains supply.
As a special feature, the power strip has two USB ports that permit appropriate equip-
ment to be supplied with power.
The product may only be used in dry, enclosed spaces.
Always observe the safety instructions included in these operating instructions. Read
the operating manual carefully; keep it in a safe place and pass it on to other users of
the power strip, where appropriate.
Any use, other than the one described above, may damage the product. Moreover, this
involves hazards such as e.g. short circuit,
fi
re, electric shock, etc. It is not allowed to
modify or rebuild any part of the product!
This product complies with the applicable National and European requirements. All
names of companies and products are the trademarks of the respective owner. All
rights reserved.
Package Contents
• Power strip
• Operating instructions
Explanation of Symbols, Inscriptions
The lightning symbol indicates a health hazard, e.g. electric shock.
This symbol indicates speci
fi
c risks associated with handling, function and
use.
The “arrow” symbol indicates special tips and operating information.
The product is only intended to be placed and used in dry, enclosed in-
door areas; it must not get damp or wet.
Observe the operating instructions!
Safety Instructions
The warranty will be void in the event of damage caused by failure to ob-
serve these safety instructions! We do not assume any liability for any
consequential damage!
We do not assume any liability for material and personal damage caused
by improper use or non-compliance with the safety instructions! The
warranty will be void in such cases!
a) General instructions
• The unauthorised conversion and/or modi
fi
cation of the product is not
permitted for safety and approval reasons (CE). Do not open/disassemble!
Contains no customer-serviceable parts.
Maintenance, adjustment or repair work may only be carried out by an ex-
pert/authorised service centre, which is familiar with the hazards involved
and the relevant regulations.
• The device is designed according to safety class I. It may only be used and
connected to an earthed mains socket.
• The power strip is equipped with a child safety device. Only when the prongs
of a power plug are inserted into both openings of a socket at the same
time will the mechanism release the opening.
Even so, be especially careful if children are around. Children cannot realise
the danger arising from the incorrect use of electrical devices. There is a risk
of a life-threatening electric shock!
The product is not a toy and must be kept out of the reach of children. Posi-
tion the product so it is out of the reach of children.
• Do not carelessly leave the packaging material lying around since this may
become a dangerous toy for children.
• Handle the product with care, it can be damaged by impacts, blows, or ac-
cidental drops, even from a low height.
b) Installation location
• The product may only be used in dry, enclosed, indoor areas, it must not get
damp or wet! Never place the product in the direct vicinity of a bathroom,
shower, bathtub or similar. Lethal hazard due to electric shock!
• The product must not be exposed to extremes of temperature, direct sun-
light or strong vibrations.
• Unwind the mains cable completely during use. The power cable must not
be pinched or damaged by contact with sharp edges. Do not place any ob-
jects on the cable, and do not allow it to become kinked. Install the cable
where no one can stumble over it and the plug is easily accessible. Do not
install the mains cable under carpets or the like.
• Do not operate the device in environments where there are high levels of
dust,
fl
ammable gases, vapours or solvents. There is a danger of
fi
re and
explosion!
c) Handling and Use
• Never plug in or unplug the product with damp or wet hands. There is a risk
of a life-threatening electric shock!
• Never connect the product to the power supply immediately after it has
been brought from a cold room into a warm one (e.g. during transport).
The condensation that develops in such cases could damage the device or
cause an electric shock! Allow the product to reach room temperature. Wait
until the condensation has evaporated. This might take several hours. Only
after this should the product be plugged in to the mains and put into use.
• Always unplug the mains plug using the gripping surface intended for this
purpose. Never unplug the mains plug from the socket by pulling on the
cable!
• Do not overload the power strip. Observe the connected load in the chapter
“Technical Data”.
• Do not connect in series! This can lead to overloading of the power strip! Fire
hazard!
Plug the power strip's earthed mains plug directly into a wall outlet, for
example. Do not connect one power strip to another.
• Do not operate while covered! At higher connected loads, the power strip
and the connection cable heat up, which could lead to overheating and
fi
re
if covered!
