66
The home technology brand for the entire house. More information at
www.sygonix.com
c) Submenu “PTZ“
Observe that the following settings must correspond to the settings of your PTZ
camera. Please note the operating instructions of your PTZ camera.
Click the menu “DEVICES” in the main menu and then
the submenu “PTZ” to call the submenu for setting a
pan, tilt, zoom camera (PTZ).
PROTOCOL:
Pelco-D, Pelco-P
BAUD RATE:
1200, 2400, 4800, 9600
DATA BIT:
8, 7, 6, 5
STOP BIT:
1, 2
PARITY:
None, Odd, Even Mark, Space
CRUISE:
ON, OFF
ADDRESS:
Free assignment
PTZ Control Functions
The PTZ control functions can be called in the pop-
up menu (see chapter: “9.4 Pop-UP Menu”) Option
“PTZ”.
SLOW/FAST:
Use this bar to set the speed of the
PTZ camera.
ZOOM:
Adjust zoom
FOCUS:
Adjust focus
IRIS:
Adjust camera IRIS
CRUISE:
Select the Cruise option to set an automat-
ed motion sequence for your PTZ camera.
Use the indicated directional arrows to set the de-
sired camera position.
Channel:
Select the video input to which the PTZ
camera is connected.
TOTAL:
Pre-set BIT number (angle). Please note the
operating instructions of your PTZ camera.
CUR POINT:
Motion point (default settings = 01;
starting point at the same time).
