Caution:
• To avoid damaging the components, do not attempt to open or repair the product
without professional guidance.
• The operating range may be affected by environmental factors and nearby
sources of interference.
• Proper use helps to prolong the lifespan of the product.
b) Operation
Hazard of electric shock, explosion, arc flash or fire:
• Turn off all power supplying this equipment.
• Use a voltage tester of appropriate rating.
Failure to follow these instructions will result in death, serious injury or equipment
damage.
c) Connected devices
Also observe the safety and operating instructions of any other devices which are
connected to the product.
d) Electrical installation
WARNING! Safety hazard!
The product should only be installed by people with relevant electrical knowledge
and experience! *)
If it is not installed properly, you risk:
• your own life
• the life of user of the electrical device
•
severe damage to property, e.g., by fire
• personal liability for personal injury and material damage
Always consult an electrician!
*) Technical knowledge required to perform the installation:
For the installation, the following specialist knowledge is required in particular:
• The “Five safety rules”: Disconnect from the mains; protect against accidental
switch-on; ensure there is no voltage; earth and short-circuit; cover or protect
adjacent live parts
• Use of suitable tools, measuring devices and personal protective equipment,
where necessary
• Analysis of measurement results
• Use of electrical installation materials to meet the requirements for disconnection
• IP protection ratings
• Installation of electrical installation materials
• Type of power supply (TN system, IT system, TT system) and the corresponding
connection criteria (classic earthing, protective earthing, necessary additional
measures etc.)
If you are not a professional, do not do it yourself, have it performed by a specialist.
Features
•
Suitable for retrofitting and new installations.
• No neutral required.
• Soft-start to protect lamp and driver.
• Over-load, over-current and over-heating protection.
Operation
Min.
brightness
Min.
brightness
Note:
• This is a two-wire dimmer to be connected as shown above.
• Multiple dimmers cannot be connected in parallel to operate the same charge from two
points.
Operating Instructions
Universal LED double dimmer, 2x 100 W
Item No. 2348945
Intended use
This universal dimmer is designed for dimmable LED, incandescent and LV halogen lights
with electronic transformers. It automatically sets the dimming method according to the load
(leading edge or trailing edge) and conveniently houses dimmers for two lights in one switch.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you
use the product for purposes other than those described, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Dimmer with cover
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave the packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases, steam, and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts, or a fall, even from a low
height, can cause damage to the product.
• Consult an expert when in doubt about the operation, safety, or connection of
the appliance.
•
Maintenance, modifications, and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
