A wireless socket remains in programming mode for
around 15 seconds. The power LED flashes. If you
delete several wireless sockets, you must complete the
deletion process within 15 seconds of plugging the first
wireless socket in.
4
Deleting individual wireless sockets
5
Method 1:
1. Unplug the wireless socket that you wish to delete from the
mains socket. Wait around 5 seconds before reconnecting
the power supply. The power LED (6) flashes.
2. Then, press the
OFF
button (2) for the channel of the wire-
less socket that you wish to delete. The programmed wireless
socket has been deleted.
3. Repeat this procedure for up to 12 channels, if necessary. Set
the desired switch group (I, II, III or IV) on the remote control
using the switch group selector switch (4).
6
Method 2:
1. Press and hold the
ON
and
OFF
buttons (2) on the remote
control for approx. 5 seconds. The power LED (6) on the
wireless socket starts to flash to indicate that the device is in
programming mode.
2. Press the
OFF
button (2) of the channel that you wish to de-
lete on the remote control to delete/reset the selected wire-
less socket individually.
45
