GB
Operating instructions
IR spot, array LEDs, 90°
Item no.
Intended use
The product is used as an additional lamp for surveillance cameras. The
IR light, invisible to human eyes, helps optimally illuminate the area mo-
nitored by the camera at night.
The IR spotlight is activated automatically at dusk through an integrated
sensor and deactivated again at daylight.
The IR spotlight is intended to be used only with a stabilised direct cur-
rent of 12 V/DC.
The product is designed for operation indoors and outdoors (IP66).
For safety reasons, you may not convert and/or alter the product. If you
use the product for purposes other than those described above, the pro-
duct may be damaged. Furthermore, improper use may cause risks such
as short-circuits, fire, electric shocks, etc. Please read the operating ins-
tructions carefully and do not discard them. If you pass the product on
to a third party, please hand over these operating instructions as well.
This product complies with the applicable national and European regu-
lations. All names of companies and products are the trademarks of the
respective owners. All rights reserved.
Package content
• IR spot
• Fastening material (4x screws, 4x dowels)
• Hex key
• Operating instructions
Up-to-date operating instructions:
1. Open www.conrad.com/downloads in a browser or
scan the displayed QR code.
2. Select document type and language and enter the
item number into the search field. After submitting
the query you can download displayed records.
Explanation of symbols
This symbol indicates specific risks associated with handling, opera-
tion or use.
The arrow symbol indicates special tips and operating information.
Safety instructions
Please read the operating instructions carefully and pay particular
attention to the safety instructions. We do not assume liability for
injuries/material damages resulting from failure to observe the sa-
fety instructions and the information in these operating instructions
regarding the proper handling of the product. Furthermore, in such
cases, the warranty/guarantee will be null and void.
• The IR spotlight is intended to be used only with a stabilised direct
current of 12 V/DC. The inner contact of the round low-voltage plug
should be plus/+, the outer contact minus/-.
• This product is not a toy. Keep out of the reach of children and
pets.
• Do not leave packaging material carelessly lying around. It may
become a dangerous plaything for children.
•
The product is designed for operation indoors and outdoors
(IP66). However, it must never be used in or under water, as this
will destroy it.
• The connector plugs on the IR spotlight‘s connection cable are not
waterproof or watertight and must therefore be placed in a dry
indoor area or be protected accordingly.
• Make sure that the connection cable does not get pinched, kinked
or damaged by sharp edges.
• Protect the product from extreme temperatures, direct sunlight,
strong vibrations and combustible gases, vapours and solvents.
• Handle the product with care. The product can be damaged if crus-
hed, struck or dropped, even from a low height.
• Never expose the product to mechanical stress.
• Also observe the safety and operating instructions of any other
devices that are connected to this product.
• The IR light is invisible to the human eye. It is therefore not pos-
sible to tell whether the IR LEDs are lit or not. Due to the intensity
of the IR LEDs installed in the IR spotlight, there is a risk of eye
damage if you look at them from a short distance (<2 m) or over a
longer period of time.
Attention: IR LED light!
- Do not look directly into the IR LED light!
- Do not look into the beam directly or with optical instruments!
• If safe operation is no longer possible, take the device out of ser-
vice and secure it against unintended use. Safe operation is no
longer possible, if the product:
- has visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an exten-
ded period of time or
- has been exposed to considerable strain during transport.
• If you have doubts about how the product should be operated, or
about safety or the connection of the product, consult an expert.
• Maintenance, adjustment and repair work may be carried out only
by an expert or a specialist workshop.
• If you have any questions that are not answered in these operating
instructions, please contact our technical customer service or ano-
ther specialist.
Assembly
The IR spotlight is equipped with a pre-mounted wall bracket. This can be
fastened to a suitable place using four screws. Use appropriate screws
and wall plugs, depending on the surface.
Make sure when screwing it into place or when drilling holes that no
cables or wires are damaged.
If the connection cable is to be laid so it is hidden, a correspondingly lar-
ge hole has to be drilled underneath the wall bracket, so the plug can be
passed through. The wall bracket will then cover this opening and protect
the cable from intentional damage.
Alternatively, the cable can lead to the outside. There is a suitable hole
on the wall bracket. In this case, protect the cable with a suitable cable
conduit or similar.
The connection plugs are not waterproof and therefore should be
kept indoors; otherwise they will corrode.
To align the IR spotlight, loosen the Allen screw of the wall bracket.
Move the IR spotlight to the desired position and re-tighten the bracket.
Accurate alignment can be performed during the operation of the IR
spotlight and the surveillance camera at night, when the area illuminated
by the IR light is shown on the monitor (the IR light of the IR spotlight or
the surveillance camera is invisible to the human eye).
1425517