Page : 16
________________________________________________________________________________________________
HYDRO’pH
®
,
HYDR’ORP
®
,
HYDRO’pH Duo
®
and
HYDRO’pH/ORP
®
instructions
4
Installation and connections
4-1
Transport and storage of HYDRO’pH
®
,
HYDR’ORP
®
and
HYDRO’pH/ORP
®
HYDRO
range controllers are high-tech electronic devices that use electronic components and
sensitive electrochemical sensors.
Despite the care taken in the design on the strength and robustness of the components used, make all
arrangements for transport and storage equipment.
NOTE:
Equipment storage in a dry place.
After unpacking, proceed to the assembly as quick as possible.
CAUTION:
Transport equipment with caution!
Do not shock! Protect pH and ORP sensors from shocks, concentrated
chemicals and ensure of permanent humidification of measurement
tips.
NOTE:
The recyclable packaging of HYDRO devices must be eliminated
according to the current rules!
Keep wintering packaging!
RECYCLING:
Electronic equipments shall be brought back to your retailer so he can
proceed to their elimination respecting the current rules!
Keep wintering packaging!
4-2
Wall mounting terms
Dry and dusted place
Operating ambient temperature between 0°C and 45°C
Installation location out of vibrations
Clean, non-distorted support
Correct wall fixing
CAUTION:
Respect mounting instructions. In case of non-compliance:
● The unit may be damaged
● Measurements may be disturbed
● The warranty will not be insured!
4-3
Wall installation of control device
DANGER:
Prior to installing the devices and connections of cables, pipes and
fittings, cut power supplies!
The IP65 protection class is guaranteed only if the closure caps of the
Hydro’… electronic controllers are closed and the wires correspond to
the diameter of the cable gland!