WLAN6060SD Card User Manual
8 Legal Information
8.1 Applying the Regulatory Country Stamp
A regulatory Label is applied on the back of the WLAN6060SD Card.
The regulatory label signifies that the WLAN6060SD Card is approved for use in the following countries:
•
United States
•
Canada
•
Australia
•
Japan
•
Europe Union (except Belgium and France)
For approved countries other than those listed above, a sheet of adhesive country stamps may be enclosed
within the WLAN6060SD Card package.
To apply the country stamp:
1. Peel the stamp appropriate to the country where the WLAN6060SD Card is used.
2. Apply the country stamp on the bottom right-hand corner of the regulatory label located on the
back of the WLAN6060SD Card.
For countries that have not received regulatory approval, an adhesive country stamp is not enclosed. Refer
to
for the latest list of approved countries.
! Operation of the device without a regulatory label or the correct country stamp is illegal.
SyChip Confidential Page 18 of 21 SyChip_WLAN6060SD
