Sybase Adaptive Server 15.0.2, Installation Manual

Page: 36 / 160

Pre-installation tasks for SySAM
22
Adaptive Server Enterprise
e Enter or select the destination directory.
f Select the Custom installation.
g Select only “SySAM License Server” for installation.
h Deselect other components, to install the license server only.
i Click OK for the installer to install the license server.
Note
The license server cannot be started until there is at least one valid
served license installed in the licenses directory.
3 Get the host ID for the machine on which you will be running the license
server. For information on how to generate the host ID, see “Getting your
host ID” on page 17.
4 Go to the
Sybase Product Download Center (SPDC) at
https://sybase.subscribenet.com
.
5 Generate the licenses for the products you want to install. For instructions
on generating your licenses, see “Generating licenses at SPDC” on page
18.
6 From command prompt navigate to installed directory Source/Execute to
setup the environment variables.
•
ASE150.bat
7 Copy the license file in the %SYBASE%\%SYBASE_SYSAM%\licenses
directory on the network license server machine.
8 Refresh or restart the license server:
a Change to:
%SYBASE%\%SYBASE_SYSAM%\bin
b If the license server is not already started, start it, by entering:
sysam start
If the license server is already started, use the reread command to
make the license server read the new license files:
sysam reread
9 Validate that the license daemon is running by entering:
sysam status
You can expect to see output for a running server that is similar to: