Sybase Adaptive Server 15.0.2, Installation Manual

Page: 134 / 160

Removing an old server
120
Adaptive Server Enterprise
5 The component selection window displays with everything selected.
Deselect components by clicking the check box and erasing the check
mark. Click Next to continue.
Note
If there is SySAM Network License Server installed on this
machine, it may be used by other Sybase products. Uncheck this
component unless you know no one is using this License Server.
6 A summary window displays what is about to be uninstalled. Click Next
to continue.
7 A window displays indicating that the uninstallation process is being
performed. There is no progress bar.
Note
One or more pop-up displays may occur indicating that a file was
modified after it was installed and requesting confirmation that it should
be deleted.
8 If there are any user created files left over from the uninstall, the
uninstaller will prompt user if it can remove them.
9 When the uninstall process has completed a final window displays. Click
Finish to exit the uninstall program.
On Windows, there are also a small number of registry entries that are not
removed by the uninstall program. These are documented below:
• Remove the DSLISTEN and DSQUERY environment variables, using the
system option from the Control Panel.
Removing an old server
1 Stop the server.
2 Restart the machine to release any DLLs.
3 From the Windows Task bar, select Start | Programs | Sybase | Server
Config. The Configure Sybase Server window displays.
4 From the icons on the left of the Configure Sybase Servers screen, select
the type of Sybase server to remove.