SY VWP24-18G, User Manual, Page: 5 / 16

V1.0 5 sy.uk
Rear
Name Description
LAN RJ45 control port for operation by TCP/IP
RS232-CTL
External RS232 control, Baud Rate: 57600
Data Bits: 8 Parity: None Stop Bits:
1
RS232 To bypass RS232-CTL commands to next unit
UPDATE Firmware upgrade
Balanced Audio out 5 way phoenix Jacket, 20Hz – 20kHz, 1.5Vrms max
Mini Toslink

L+R Audio Output
3.5mm Stereo Jack. 20Hz – 20kHz, 1.5Vrms max

Optical S/PDIF Audio Output
HD A HDMI A input
HD B HDMI B input
LOOP OUT A Bypass HDMI A signal to downstream
LOOP OUT B/MAIN
Bypass HD B or HD A signal to downstream – configured by RS232 /
LAN command
HD 1…HD 4
HD 1…HD 9
HDMI scaling outputs for video wall display
DC2.1
IEC C14 VWP-24-18G: 12V/3A DC power input
VWP-29-18G: 110-240V Mains input – 2A Fuse
Using the VWP24 and VWP29
Connect the desired video sources to VWP24 or VWP29 input HD A or HD B connectors and the
desired output video wall display devices to HD1…HD9 HDMI output connector. VWP24/VWP29
units can be cascaded together (or Daisy chained) to create any size video wall (8x8 max).
The PC Tool facilitates easy set up and operation. The units can be controlled via LAN or RS232
connection. Up to 10 VW layout configurations can be saved and recalled as required.
VWP24 and VWP29 PC tool
Switch tab on the PC tool
1. PC tool connection with UART or Network
2. Select input source for each scaling output port
3. All Set function, select HD A or B to all the scaling output
4. Select input source for B/MAIN output port
5. Select audio source for balanced audio output and Mini Toslink output
6. EDID configure
7. Reset