V1.0
11
Daisy chain and Cascade mode
VWP24 / VWP29 support daisy chain and cascade modes, enabling large VW configurations (up
to 8x8).
To control the units, following RS232 connection can be used (For example, 3 VWP29 units
connection)
To build daisy chain or cascade connection, user need separately configure each unit Device ID
and First output port index first by its own LAN or RS232-CTL port
The first unit device ID should be set 1, and its first output index should be set to 1
The second unit device ID should be set 2, and its first output index should be set 10 (if the first
unit is VWP29) or 5 (if the first unit is VWP24)
The third unit device ID should be set 3, and its first output index should be set 19 (if there are
total 18 output ports, 2x VWP29, before this unit) or 14 (if there are total 13 output ports, 1x
VWP29 and 1x VWP24 before this unit).
1.
Set Device ID and First output index
Connect the PC tool with VWP24/VWP29, press Ctrl+Shift+F2 on the PC (some laptops may
also need the Fn key to use the function keys), and turn to video wall tab, user can set the
parameters in the Device Setting section located at the left lower corner:
Summary of Contents for VWP24-18G
Page 14: ...sy uk 14 V1 0...