SY-MMU-88A / 1616 / 3232 / 6464
11
Action
Command
Response
Check the resolution for the signal
at input
x
ResolutionGx.
Set the VGA card input to VGA
mode for input
x
USER/I/x:0622%; 0622%[cr][lf]
Set the VGA card input to YPbPr
mode for input
x
USER/I/x:0623%; 0623%[cr][lf]
Set the VGA card input to S-Video
mode for input
x
USER/I/x:0624%; 0624%[cr][lf]
Set the VGA card input to
Composite mode for input
x
USER/I/x:0625%; 0625%[cr][lf]
Set the VGA card input resolution to
1024 x 768 for input
x
USER/I/x:0626%; 0626%[cr][lf]
Set the VGA card input resolution to
1080 x 720 for input
x
USER/I/x:0627%; 0627%[cr][lf]
Set the VGA card input resolution to
1080 x 800 for input
x
USER/I/x:0628%; 0628%[cr][lf]
Set the VGA card input resolution to
1920 x 1080 for input
x
USER/I/x:0629%; 0629%[cr][lf]
Notes:
1.
Value place holders
p, x, y
and
z
should be replaced with the actual input and/or output numbers
required for the RS232 command.
2.
When selecting multiple outputs for an input, each output must be separated by a comma (
,
) and
may appear in any order.
3.
The A command is only supported by the SY-MMU-88A Matrix Switcher.
4.
The B command (Select both Audio and Video) is the only video selection command that is
compatible to all matrix switchers in the SY-MMU range.
