SXT Scooters Buddy V2 eKFV, Manual

Page: 70 / 78

70
Folding mechanism setting
Summary of the
tighten = more rigidity
loosen = easier folding
TIGHTEN
UNFASTEN
For more rigid behavior!
Use a 2.5 mm Allen wrench to loosen the M4 screws on both sides. See Figure 1 and
then use a 2mm Allen wrench to carefully tighten the screws in Figure 2.
Check the function and then tighten the two M4 screws on both sides. Figure 3
For easier folding!
Use a 2.5mm Allen wrench to loosen the M4 screws on both sides. See Figure 1 and then
use a 2mm Allen wrench to carefully loosen the screws in Figure 2.
Please note that the possible adjustment range is only a few mm and that the screws
must not be unscrewed too far so that they are not lost.
Check the function and then retighten the two M4 screws on both sides Figure 3.