SXT Scooters Buddy V2 eKFV, Manual

Page: 49 / 78

49
Fig.5 Fig.6
Fig.7 Fig.8
Fig.9 Fig.10
Mounting the front light
Finally, all you have to do is shrink the tubing over the Pull the pre-
viously connected plug (Fig.9) and heat with a hot-air dryer or care-
fully with a commercially available lighter until it contracts (Fig.10).
Before connecting the
two connectors (Fig.5),
pull the supplied heat
shrink tube over one
cable end (Fig.6 - Fig.7),
then you can connect
the two connectors
together (Fig.8).