SwyxPhone for Experts
94
2.
To terminate the logoff procedure, select “0>Cancel”. If you would like to log off, select the
option “1>Confirm” and press
9
.
The following message will appear in the display:
Another user can now log on to SwyxPhone.
This is how you log on to SwyxPhone as a user
If no user is logged on to SwyxPhone you will see the following display:
1.
Enter your PIN on the SwyxPhone keypad and confirm this with
9
.
Your user name will appear and your personal settings will be transferred to this telephone.
If a user is configured for automatic logon for this SwyxPhone, this user can log on again
without entering a PIN by confirming the empty entry prompt with
9
.
You can configure a function key with the "Logoff" function. For further information please
refer to chapter 7.6,
Configuration of Function Keys
6.10
Call Swap as a Substitute for Line Buttons
You can freely configure the function keys on your SwyxPhone (see also chapter 7.6,
Configuration of Function Keys
, page 117). Therefore, you could have only one or even no Line
buttons on your SwyxPhone. However, there are always at least two lines provided with the
SwyxPhone.
In this case, you telephone as usual by lifting the handset or by pressing the Speaker button.
Switch to the second line by selecting the option “Call Swap” in the shortcut menu or by
pressing the “Call Swap” button.
6.11
Call Intrusion
User?
PIN:_
Subscribe
User?
PIN:_
Summary of Contents for SwyxPhone L420
