SPEEDCUT 50
SPEEDCUT 50
SPEEDCUT 50 OPERATING MANUAL
8
Worn Nozzle Worn Electrode
PLASMA TORCH
6.0 Plasma Torch Parts
1‑Stand Off Guide
2‑Outside Nozzle/Outside Nozzle 6 Holes (Longer life)
3‑Short Tip
4‑Short Tip 2
5‑Medium Tip
6‑Flat Tip
7‑Extended Tip
8‑Extended Flat Tip
9‑Diffuser
10‑Short Electrode
12‑Long Electrode
13‑Plasma Torch Head
14‑Plasma Torch Handle
15‑Trigger Safety
16‑Trigger
17‑ Joint
18‑ Cable Assembly
19‑ Electrode Spanner
20‑ 6 Pin Central Adapter
6.1 Consumables Wear
Worn torch consumables will cause poor cutting performance and will cause the ERROR! Missing electrode
or Nozzle code to display once exhausted. The diagram below illustrates an excessively worn nozzle and
electrode.
Consumables that are made for th
e
torch model are to be used only.
IPT40, IPT60
or SC50 models must use the correct genuine consumables.
Not using the correct consumables may result in damaging the plasma torch head
and machine.
