32
BAG
J
104004
115018
115018
104004
104004
104004
106007
106020
2501112A
2501112A
106020
115016
2503260-2
330156A
330156A
2503260-19
2501125C
330157A
330157A
115018
115017
50
52
51
Linkage
Adjustment
Turn on the transmitter and receiver. Set the throttle servo
trim in neutral. Adjust the idle adjustment screw to make the
carburettor opening no more than 1mm. Adjust the position
of servo horn. Check that it operates smoothly without
making the operation of the other parts difficult.
Make sure the brake does not work in this setting.
Neutral
Full Throttle
Brake
Idle adjustment screw
※
Adjust the servo horn to fully open the
carburettor. Change the position of
servo horn if the carburettor is not fully
open or opens too much. If your transmitter
has a function to adjust throttle end points,
make an adjustment this way.
※
Adjust the position of servo horn to make
the brakes function. Make sure the brakes
do not work when the servo trim is in
neutral.
※
115018
Brake Rod 60mm
x2
115016
Throttle Rod 50mm
x1
104004
M3x3mm Set Screw
x6
330156
Adjuster Knob
x4
115015
Brake Spring
x2
115017
Throttle Rod Spring
x1
108006
M3x8mm FH/ST HEX Screw
x1
105004
M2.6x6mm Cap Screw x1
106007
M3x12mm Hex Socket OH/TP Screw(HT) x1
330157
Brake Adjuster Knob
x2
A
A
103001
M3 Nut Lock x1
108006
2503260-12
115015
330156A
104004
106020
M2.5x5mm Hex Socket OH/TP Screw x
3
