Operating Instructions
www.snopakebrands.com
Installation
• Make sure the waste basket is securely in place
• Connect the electricity plug to any standard power socket
Operation
The switch on your Swordfi sh shredder enables you to select one of the following settings:
• auto-
with this setting the shredder is automatically started by inserting paper into the shred opening
• reverse -
in the unlikely event of paper jam, the reverse setting can be used to help clear the cutters of paper
that has not passed through properly
• forward -
helps clear loose paper that is still on the blades or shredder shaft
Capacity
This Swordfi sh shredder will shred:
•
up to 12 sheets of 80gsm paper per pass, with a max width of 220mm.
•
paper clips and small staples
•
single credit cards
•
single CDs, DVDs
Continuous shredding should not last more than 8 minutes, after which the shredder should be allowed to cool
down for 40 minutes before continuing. In the event of a major paper jam, or if the shredder is used continuously
for more than 8 minutes, the shredder will automatically switch itself off . After an auto power off , put the switch
into the
off
position for 40 minutes before turning the shredder back on.
It is good practice to oil the shredder every time you empty the bin. For further details please see page 12.
Warning
• Do not place fi ngers too close to the feed slot as serious injury may occur
• Always disconnect the power plug before cleaning a Swordfi sh shredder
• Repairs must be carried out by a specialist. There are no user-serviceable parts inside a Swordfi sh shredder
• Keep the waste bin emptied so that the shredder output is not impeded
• Swordfi sh shredders should only be used within the defi ned capacity
• Keep all loose articles of clothing, ties, jewellery, long hair or other loose objects away from opening
• Keep children away from the machine. This shredder is not a toy
• Do not pass soft plastics through the shredder
• Shredders should be oiled on a regular basis and before any period of intensive shredding
• Lubrication should always be done when the shredder is cold. Never add oil to a hot shredder
ENGLISH
6
