Operating Instructions
www.snopakebrands.com
Replacing the Cutting Mat Strip
1
3
5
2
4
7
Remove the guide-rail end-stop
by sliding it upwards
Lift and remove the transparent
pressure-plate
Note that a replacement cutting-mat strip is packed inside the guide rail.
Further cutting strips are available in packs of 3, code 40346.
Remove the guide rail and cutting
head.
Caution – do not touch
the blades – they are
extremely sharp!
The cutting mat can now be
removed and rotated or replaced
The rotary blades run on a replaceable cutting-mat strip. In time, this will wear and
require replacement. However it will have a long life as it can be both rotated and
fl ipped. To remove or replace the cutting mat:
When re-assembling your Swordfi sh 5-in-1 Creative Trimmer, please ensure that the
transparent pressure-plate is correctly located and that the rotary blades are running
on the cutting mat, not on the pressure-plate.
