- Operation -
54
3.9
Increasing the maximum range
The radios are equipped with a so-called Auto-Squelch system, by
means of which weak transmissions and undesirable noises are
automatically filtered out during use. This Auto-Squelch system can be
temporarily switched off in order to increase the range.
Press and hold the
AUTO-SQUELCH
button on the left-hand side. The
automatic suppression will be switched off and it will now be possible
for even very weak signals to be received. If the
AUTO-SQUELCH
button is kept pressed until a signal tone sounds, the Auto-Squelch will
be switched off completely. To switch the Auto-Squelch on again, press
the
AUTO-SQUELCH
button once more.
3.10
Automatic energy saving mode
The radios are designed with a power saving mode. If no transmissions
take place within a certain time, the unit switches itself off automatically.
The time can be set to 1, 2 or 3 hours. In setting 0, energy saving mode
is switched off.
1.
Press the MODE button seven times. The
indicator will flash in
the display.
2.
Select the required sensitivity using the
and
buttons.
Energy saving mode is switched off with the setting 0.
3.
Confirm the selection with the talk button on the left-hand side.
The
indicator appears in the display when the energy saving mode
is switched on.
