switel DE 36series, Operating Instructions Manual

Page: 32 / 36

6
Registering a handset
☞
Five handsets can be registered to a base station. The handsets deli-
vered with your telephone are already registered. To register a “foreign“
handset please refer to it’s user manual.
First of all disconnect the base station from the mains and re-connect it.
After this the base station will be in registration mode for one minute.
… press, select
REGISTER using
¦
/
‹
and press .
¦
/
‹
Select a base station to subscribe to and press .
Enter the base’s PIN (DE 36x base station in delivery state “0 0 0 0“) .
Deleting a handset
☞
You can delete a handset from a base to allow another handset to be
registered. Note: you can only remove other handset in your system but
you are not able to remove the handset you are using.
… press, select DE-REGISTER using
¦
/
‹
and press .
… press and hold for approx. 3 seconds.
Enter the PIN for the base station (DE 36x base station „0 0 0 0“).
Enter the internal telephone number (1…5) of the handset you want to
remove.
OK
OK
OK
OK
OK
Resetting the handset (delivery state)
☞
The handset will be resetted to the delivery state - the entries in the
phonebook, the caller list and the redial list will be deleted.
… press, select HANDSET using
¦
/
‹
and press .
¦
/
‹
Select RESET and press .
Confirm the safety request by pressing and enter the PIN (0 0 0 0 in
delivery state).
Dialling mode (Tone / Pulse)
☞
You can switch the dial mode. In most situations the TONE option
should be selected.
… press, select BASE using
¦
/
‹
and press .
¦
/
‹
Select DIAL MODE and press .
¦
/
‹
Select TONE or PULSE and press .
or
… press and hold for approx. 3 s. T (Tone) or P (Pulse) appears in the
display.
Flash time
☞
You can set the flash time to 100 ms (usually for special services of
your telephone provider/delivery state) or 300 ms (e. g. for a telephone
exchange). In case of questions please contact your telephone provider or
the system administator of your PBX.
… press, select BASE using
¦
/
‹
and press .
¦
/
‹
Select RECALL and press .
¦
/
‹
Select SHORT or LONG and press .
or
… press and hold for approx. 3 s. S (100 ms) or L (300 ms) appears in
the display.
System PIN
☞
In delivery state the PIN is set to “0 0 0 0“.
The PIN is valid for all registered handsets.
… press, select BASE using
¦
/
‹
and press .
¦
/
‹
Select SYSTEM PIN and press .
Enter the old PIN and confirm by pressing .
Enter the new PIN twice and confirm each by pressing .
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
DE36x_GB_Version2 04.06.2009 14:55 Uhr Seite 6