Operating the telephone
115
1
Press the up and down keys to scroll through the list.
The position number of the call in the calls list appears next to the
CLIP
symbol.
2
Press the left and right keys to display the name or number.
Info:
The phone reverts to standby mode if neither the up or down key is pressed within 15
seconds. When a call is received, the caller's number is shown in the display for another 5-8
seconds after the last ring.
Calling a number in the call list
1
Press the calls list key.
2
Press the up and down keys to scroll through the list.
3
Pick up the receiver or press the hands free key again to make the
call.
Storing a number in the phone book or as an abbreviated dialling number under M1 to M3
1
Press the calls list key.
2
Press the up and down keys to scroll through the list and confirm.
3
Select
"SAVE TO PB"
or
"SAVE TO MX"
(MX = M1 to M3) and
confirm.
4
You can now enter or edit the name and then confirm.
5
Enter or edit the telephone number and confirm.
Deleting one entry or all entries in the calls list
1
Press the calls list key.
2
Press the up and down keys to scroll through the list and confirm.
3
Select
"DELETE ENTRY"
or
"DELETE ALL"
and confirm twice.
Important:
Only old calls will be deleted. New calls that have not been viewed or were
unanswered will be kept.
4.17 Making an internal call to a handset and forwarding a call to the cordless handset
You can forward a call from the base station to the handset or talk to the external subscriber and a
second subscriber on the cordless handset at the same time (conference call).
1
Hold down the INT key for 3 seconds until you hear an audio signal,
then release the key.
"INT"
appears in the display.
2
Enter the number of the handset. Once the call has been set up with
the handset, you can talk internally.
3
Put the receiver down to transfer the call to the cordless handset.
OR
4
Hold down the INT key for 3 seconds to set up a conference call.
