Operating the telephone
113
4.10 Abbreviated dialling keys
You can store 3 direct abbreviated numbers M1, M2 and M3 (each up to 24 digits) in the base station.
Saving direct abbreviated dialling numbers (M1 - M2 - M3)
1
Press one of the abbreviated dialling keys.
2
Press OK.
3
Select
"NEW ENTRY"
and confirm.
4
Enter the name and confirm.
5
Enter the telephone number and confirm.
A confirmation tone is now sounded.
Info:
To save a pause in the telephone number, press the pause key '
P
' for 2 seconds at the
place where you want to inserted a 3 -second pause. Abbreviated dialling numbers can be
edited or deleted in the same way described for the phone book above. Unassigned
abbreviated dialling keys are displayed as
"EMPTY"
.
Dialling an abbreviated number
1
Lift the receiver or press the hands free key.
2
Press the abbreviated dialling key. The telephone number is
automatically dialled.
3
Hang up the receiver or press the hands free key again to end the
call.
4.11 Setting the internal / external ring tone
There are 9 different ring tones available (1 - 9).
1
Press the Menu / OK key.
2
Select
"RING TONE"
and confirm.
3
Select
"INTERNAL"
for internal calls.
OR
4
Select
"EXTERNAL"
for incoming external calls.
5
Now select a ring tone (1 to 9) and confirm.
4.12 Setting the ring tone volume
1
Press the Menu / OK key.
2
Select
"RING TONE"
and confirm.
3
Select
"VOLUME"
and confirm.
4
Select the required volume (Off, 1-5) and confirm.
4.13 Setting the dialling mode
There are two dialling modes for telephone connections:
DTMF / tone dialling (most common)
Pulse dialling mode (only necessary if this devices is operated on an older PBX!)
1
Press the Menu / OK key.
