- Operation -
89
4.7
Muting the microphone in the handset
You can turn off the handset microphone during a call by using the
button. It is thus
possible to speak without the other person hearing you. The loudspeaker in the handset remains
switched on and you can continue to hear the other person.
1. Press
the
button once during a call. The message will appear in the display.
2. To switch the microphone on again, press the
button once more. The message
will go off and you can continue the call as normal.
4.8 Adjusting
the
receiver
volume
If the receiver volume is too quiet or too loud for you, you can change this to suit your
requirements.
You can adjust the volume during a call by means of the
and
buttons. The
selected volume will be shown in the display with the message
EAR
VOL 1 to 5
.
4.9
Redial facility
You can use the redial facility if the person called is engaged or does not reply. Your telephone
remembers the last 10 numbers dialled.
1. Press
the
button and the last phone number dialled will be shown in the display.
2.
Further redial numbers can now be selected using the
button. The
button is
used to page back through the list.
3.
Now press the call button
and the telephone number displayed will be automatically
dialled.
Note:
If the redial number is stored in the phone book, the name will automatically appear in the
display instead of the phone number.
4.10 Switching the handset on and off
You can switch off the handset by pressing and holding the
INT
button. If the handset is
switched off, no battery power will be used. It will not be possible to receive calls.
Press the
INT
button once to switch the handset on again. The display will show the
message
BASE
1
and the handset will switch on again after a short time. The handset will switch
itself on automatically as soon as you replace it on the base station.
