- Special functions -
55
6.3 Switching the button click on or off
Each time a button on the handset is pressed, this is confirmed with a short signal tone
(button click).
PROGRAMMING STEPS
DISPLAY
1. Press
the
button.
1-STORE MEM
2. Press
the
p
button.
You will hear a signal tone and the indicator in
the display will go off.
(Factory setting: On => Beep On)
BEEP OFF or
BEEP ON
Repeat the procedure to switch the button click on or off again.
6.4
Setting the flash time
Three different flash times can be set by means of the R-signal button.
PROGRAMMING STEPS
DISPLAY
1. Press
the
button.
1-STORE MEM
2. Press
the
s
button.
(Factory setting: 100ms)
Current flash time
100 – 250 or 600
3. The required flash time can now be set using
the
and buttons.
Selected flash time
100 – 250 or 600
4. Confirm
with
and the entries will be
saved.
6.5
Accepting calls automatically
Incoming calls are accepted automatically when you lift the receiver from the base station. If
you only want calls to be accepted by means of the call button
, you can deactivate the
automatic acceptance facility.
PROGRAMMING STEPS
DISPLAY
1. Press
the
button.
1-STORE MEM
2. Press
the
q
button. You will hear a signal tone
and the indicator in the display will go off.
(Factory setting: On => Auto On)
AUTO OFF or
AUTO ON
Repeat the procedure to switch the function on or off again.
Summary of Contents for D6005
Page 17: ...www switel com...
