Operating the Receiver
57
6 Operating the Receiver
Check the transmitter and receiver are working properly each time before the equipment
is put into operation.
Switching the receiver on/off
The LCD switch (8) on the side of the receiver has three settings:
y
“OFF”- The device is completely deactivated.
y
“LCD OFF”- The device only plays the sounds received from the transmitter. The display is switched
off.
y
“ON”- The device displays the images and sounds received from the transmitter.
Setting the volume
y
Press the (+) button (6) to raise the volume.
y
Press the (-) button (6) to lower the volume.
Setting the brightness
y
Press the
Mode button once.
y
Press the (+) button (6) to increase the brightness.
y
Press the (-) button (6) to reduce the brightness.
Set the required brightness.
Setting the contrast
y
Press the
Mode button twice.
y
Press the (+) button (6) to increase the contrast.
y
Press the (-) button (6) to reduce the contrast.
Set the required contrast.
Setting the colour saturation
y
Press the
Mode button three times.
y
Press the (+) button (6), to increase the colour saturation.
y
Press the (-) button (6), to reduce the colour saturation.
Set the required colour saturation.
