21
2. Power Adapter Connecting
Only use CE certificated adapter
Plug power adapter (included) to the DC 9V Jack of "baby unit"
and AC outlet (Fig. III )
For a long term usage at a fix location in house of the "parent
unit", you can buy a power adapter (9V DC, 200 mA, female plug
centre negative (−)) to plug the power adapter (not included) to the
DC 9V jack of "parent unit" and AC outlet (Fig. IV).
Set channel selection of "baby unit" and "parent unit" to the same
channel "A" or "B".
When the units will not be used for a long time, should remove
all the batteries, otherwise, the battery may leak and damage
the units.
Each of the "baby unit" and "parent unit" has a Iow battery
indicator. If the Iow battery LED lights up, please replace new
batteries.
The adapter of both units Output DC 9V 200 mA female plug,
centre negative (−) is recommended.
If the units are both installed with batteries and connected
adapters. Even AC power failure, the units will continue to
work with batteries.
Only Use CE Certificated Power Supply
5 Operation
1. "Baby Unit" (Transmitter)
Make sure the AC power adapter is connected or batteries are
installed correctly.
Place the "Baby unit" near the baby’s bed, making sure that the
microphone is placed in the best position for picking up baby’s
sound. (Fig. V)
Ensure the unit to be out of reach from your child. Never
place it inside baby’s bed or playpen!
Turn the power switch ON and the power indicator LED will light
up. When sound is picked up by the built−in microphone, the "baby
unit" starts transmitting signal automatically to "parent unit". The
transmission will stop when no sound is picking up any more.
