*This may not be applicable to your particular installation.
12
13
www.switch2.co.uk
Visit quickpay.switch2.co.uk or download the Switch2 app to top-up
In-Home Display
3. Usage Comparison
4. Historic Comparison continued...
Menu Option 5 - System Info
4. Historic Comparison
The Usage Comparison screens graphically display your consumption for each fuel . These
update throughout the day and can be looked at to easily review your daily usage.
The Historic Comparison screens contain graphs displaying your consumption for Today,
Yesterday, Last 7 days and the last 12 months*. In each case the screens will show the
supply type with the appropriate period in the title e.g.
‘Heat Today’
The arrow on the gauge will move round with each unit consumed. When the arrow
reaches the middle this indicates that your usage has equalled your 14 day average. When
the arrow moves past the centre towards
‘High’ this indicates that your usage today is
higher than your 14 day average.
Your Average
This screen shows the amount consumed today against
your daily average use for the last 14 days.
The value above
‘Todays use’ shows the total number of
units used today since midnight.
Your 14 day average is shown at the top under
‘Your
Average’ e.g. 20 kWh.
Today
This graph shows a full 24 hour period from 00:00 to
23:59 for the present day. Each bar shows the amount of
consumption during any given hour. At the beginning of
the day this graph will be empty and is updated hourly.
The number of units is shown on the vertical scale along
with the unit of measure.
Last 7 Days
This screen shows a rolling weekly comparison. This
shows the last 7 days of consumption compared with the
previous 7 days. The lighter bars show the last 7 days, with
the darker bars behind showing the previous 7 days.
Depending on the type of meter(s) connected to the G6,
the screens 1A &1B may show some useful information:
SN:
Serial Number of the meter
Read: The meter reading
On, At: The last time the meter was read by the G6
Rate: Tariff Information and daily standing charge
These screens show system specific information for use by Switch2 engineers.
Yesterday
This screen shows the full 24 hour period for the previous
day. Each bar shows the total consumption during each
hour of that day. The number of units is shown on the
vertical scale along with the unit of measure..
Last 12 Months
This screen shows consumption information over the
last 12 months compared with the previous 12 months.
The lighter bars represent the last 12 months values, with
the darker bars behind showing the previous 12 months
consumption for comparison. E.g. the first column shows
380 kWhs used last January (lighter bar), compared with
340kWhs used the previous January (Darker Bars)
*Please note if your G6 is replaced or reprogrammed, all historical
data will be reset. If your G6 has power disconnected then the values
for ‘Today’ and ‘Yesterday’ screens will be lost.
