3. Appearance Instruction
Transmitter SW-M450
⑴
Antenna
⑵
USB:
Micro USB, software upgrade interface
⑶
ON/OFF:
Power switch
⑷
HDMI in:
HDMI input (HDMI-A type connector)
⑸
SDI LOOP:
SDI Loop out (BNC connector)
⑹
SDI in:
SDI input (BNC connector)
⑺
DC in:
Support DC 7-34V voltage input, 5.5mm/2.1mm. Outside: negative, Inside: positive
⑻
OLED:
0.96-inch OLED
⑼
Five-direction switch:
Five-direction adjustment button (adjust the display menu to switch and confirm in
five directions: up, down, left, right, and vertical)
⑽
Installation thread:
1/4”-20 thread. Use the package supplied articulating arm trestle to install the device to
the camera.
⑾
Product label
⑿
Battery plate:
Various standard DV battery plates optional. See details in “8. Battery Plate”
⒀
Link:
RSSI LED indicator
⒁
Video:
Video signal indicator
⒂
Power:
Power status indicator
The description of LED status indicator
Device LED
indicator
Status
Description
SW-M450
Transmitter
Power
Constant On
Power connected and switched on
Off
Power disconnected and switched off
Video
Constant On
Network is connected, and there is recognizable
video signal input
Flash
Network connection failed and there is no
recognizable video signal input
Link
Constant On
The wireless network connection is normal
Flash
The wireless network connection is abnormal
